1 - INSTALLATION OF THE CR2032 BATTERY TRANSMITTERS
To install the CR2032
batteries, unscrew the transmitter cover and install the CR2032 battery, the negative pole towards the cover. Replace and screw on the cover. It is very important to ensure that the lid is screwed on tightly.
2 - RECHARGE THE RECEIVER
Before use, charge the receiver for 8 hours to fully charge the battery.
3 - INSTALLING TRANSMITTERS
To install the transmitters, screw one at the end of the handle of the putter and the others on the sticks you want to monitor.
4 - START
To turn on the ALL-IN, press the lower button on the receiver once. A beep sound combined with flashing lights (red, green, red, green) ending in green lights, will confirm that the unit is on.
5 - STOP
To turn off the ALL-IN, press and hold the lower button on the receiver for two (2) seconds. A beep sound combined with flashing lights (green, red, green, red) ending in red lights, will confirm that the unit is powered off.
6 - PAIR A TRANSMITTER
To pair a transmitter, press the bottom button on the receiver for 3 seconds. The green and red lights flash and alternate constantly. Hold a transmitter close to the receiver and the lights turn green to confirm pairing. Repeat the process with all transmitters to be used.
7 - UNPAIR A TRANSMITTER
To deactivate the pairing of a
transmitter, press the lower button on the receiver for seconds. The green and red lights flash and alternate continuously. Hold a transmitter close to the receiver, the LEDs will flash red to confirm pairing deactivation. Repeat the process with all transmitters to be disconnected.
8 - UNPAIR ALL TRANSMITTERS
To unpair all transmitters simultaneously, press the bottom button on the receiver 5 times in rapid succession. The green, yellow, and red LEDs flash simultaneously to confirm the
complete deactivation of pairing.
9 - RECEIVER LOW BATTERYINDICATOR
When the receiver's battery level is too low, the yellow lights will flash to indicate it's time to recharge the battery after the round of golf. A continuous 8-hour charge is recommended for a full charge. You can use the USB cable provided in the package or any other standard USB cable. Blinking green lights indicate charging is in progress. When charging is complete, the green lights will stop flashing and stay on. A full charge lasts approximately 3 rounds of 18-hole golf.
10 - AUTOMATIC STOP IN CASE OF NON-USE
If the receiver is not used or does not detect any movement (ex.: stoppage of the game in the event of rain) the receiver switches off automatically after two (2) hours.
11 - REPLACING THE CR2032 TYPETRANSMITTER BATTERIES
When the receiver is switched on, if the red LEDs flash simultaneously, this indicates that the battery of one or more transmitters is weak and must be replaced. To know which transmitter it is, deactivate the pairing of all your transmitters, please refer to step number 8. Then pair all your transmitters, please refer to step number 6. When a transmitter is no longer pairable (not connectable), this indicates that the battery must be replaced.
12 - NORMAL USE
ALL-IN is mostly used around golf greens. The player generally takes his "putter" with one or two "wedges". When the sticks are taken out of the bag and at a distance of about 5 feet (1.5m), the red lights will start flashing automatically after a few seconds. The red lights stop flashing when the player puts all the sticks back in the bag. If the player has forgotten a stick, the red lights flash, and a beep is heard to indicate that a stick is missing.
